BTG7003A1EPWXUMA2 vs BTG70902EPLXUMA1 Comparison
Detailed side-by-side comparison of BTG7003A1EPWXUMA2 by Infineon and BTG70902EPLXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTG7003A1EPWXUMA2
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 β ActiveInfineon
BTG70902EPLXUMA1
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 β ActiveSpecification Comparison
| Parameter | BTG7003A1EPWXUMA2 | BTG70902EPLXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $2.20 | $0.99 |
| Switch Type | High-Side Power Switch | β |
| Number of Channels | 1 | 1 |
| Configuration | 1:1 N-Channel | β |
| Maximum Continuous Load Current | 15.7 A | β |
| Operating Voltage Range | 6 V to 18 V | [DATA_NEEDED: Vbb operating range min/max] |
| Load Dump Tolerance | 40 V | β |
| Idle Mode Quiescent Current | 50 Β΅A | β |
| On-Resistance R_DS(on) | 10 mΞ© (typ) | β |
| Control Input | Active High | β |
| Wire Protection | Integrated IΒ²t | β |
| Functional Safety | ISO 26262 compliant | β |
| Package | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40C to +150C (TJ) | β |
| RoHS Status | Compliant | Compliant |
| Product Family | β | PROFET+2 12V |
| Function | β | Smart High-Side Power Switch |
| Input-to-Output Ratio | β | 1:1 |
| Output Configuration | β | N-Channel High-Side |
| Continuous Load Current | β | 2 A |
| Nominal Operating Voltage | β | 12 V (automotive bus) |
| On-State Resistance (Ron) | β | [DATA_NEEDED: Rdson typ/max in mohm] |
| Current Limit | β | Fixed (value not specified in retrieved data) |
| Protection Features | β | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Diagnostic Output | β | DEN pin (current sense / fault flag) |
| Enable Input | β | IN pin (active-high) |
| Channel Select | β | DSEL pin |
| Slew Rate Control | β | Yes (internal, for EMI) |
| Operating Junction Temperature | β | -40 C to +150 C |
| Automotive Qualification | β | AEC-Q100 (PROFET+2 family targeted at automotive) |
| MSL Level | β | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |