BTS134DATMA1 vs BTS428L2ATMA1 Comparison
Detailed side-by-side comparison of BTS134DATMA1 by Infineon and BTS428L2ATMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS134DATMA1 | BTS428L2ATMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.66 | $1.45 |
| Manufacturer | Infineon Technologies | β |
| Product Series | HITFET (BTS134) | β |
| Switch Type | N-Channel Low-Side Smart Power Switch | β |
| Technology | Smart SIPMOS (vertical DMOS + protection IC) | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Input Type | Logic Level | CMOS-compatible, ground-referenced |
| Number of Channels | 1 | 1 |
| Output Configuration | Low-Side | β |
| Continuous Drain Current (ID) | 3.5 A | β |
| Operating Voltage (VLoad) | 42 V (max) | β |
| Drain-Source Voltage (VDS) | 42 V | β |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at VGS=5V, TJ=25C] | β |
| Input Logic Threshold (VIH/VIL) | Logic-level (3.3 V / 5 V compatible GPIO) | β |
| ESD Protection (Input Pin) | Yes (embedded) | β |
| Thermal Shutdown | Yes (auto-restart) | β |
| Current Limitation | Yes | β |
| Overload Protection | Yes | β |
| Short-Circuit Protection | Yes | β |
| Overvoltage Protection (Load Dump) | Yes | β |
| Package | PG-TO252-3-11 (DPAK, 2 leads + tab, SC-63) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | [DATA_NEEDED: TJ min/max -40C to +150C is typical for HITFET] | [DATA_NEEDED: min/max] |
| Automotive Qualification | AEC-Q100 (per Arrow listing) | β |
| RoHS Status | Compliant (Green product) | β |
| Packing | Tape & Reel (T&R) | β |
| MSL Level | [DATA_NEEDED: MSL rating] | β |
| Product Type | β | Smart High-Side Power Switch |
| On-State Resistance (R_DS(on)) | β | 50 mOhm (typical) |
| Continuous Load Current | β | 5.8 A |
| Operating Supply Voltage | β | [DATA_NEEDED: nominal and range] |
| Standby Current | β | Very low (per datasheet) |
| Overvoltage Protection | β | Load-dump / overvoltage clamp |
| Overtemperature Protection | β | Yes, with autorestart |
| Diagnostic Feedback | β | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | β | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | β | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | β | Automotive-grade (PROFET family) |