BTS3011TEATMA1 vs BTS3046SDRATMA1 Comparison
Detailed side-by-side comparison of BTS3011TEATMA1 by Infineon and BTS3046SDRATMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTS3011TEATMA1 - 11mΞ© Smart Low-Side Switch, 10A, 28V | Infineon
BTS3011TEATMA1 β ActiveSpecification Comparison
| Parameter | BTS3011TEATMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.51 | $0.74 |
| Product Type | Smart Low-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Number of Channels | 1 | β |
| On-Resistance R_DS(on) (typ.) | 11 mΞ© | β |
| Continuous Load Current | 10 A | β |
| Operating Voltage Range | 3 V to 28 V | β |
| Switch Technology | N-channel vertical power MOSFET | β |
| Input Type | Logic-level CMOS compatible | β |
| Package | PG-TO252-5 (DPAK-5) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Number of Pins | 5 (4 + Tab) | β |
| Operating Junction Temperature | -40 Β°C to +150 Β°C | β |
| ESD Protection (HBM) | Β±8 kV (output pin) | β |
| AEC-Q100 Qualification | Grade 1 qualified | β |
| Integrated Protections | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection | β |
| Diagnostic Output | Open-drain status feedback pin | β |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant | β |
| Manufacturer | β | Infineon Technologies |
| Switch Configuration | β | 1:1 N-Channel, single channel |
| Continuous Output Current | β | 3.6 A |
| On-State Resistance (Rds(on)) | β | 95 mOhm (0.095 ohm) typical |
| Operating Voltage Range (Vbb) | β | 4.5 V to 42 V |
| Load Type | β | Low-side switch (ground-referenced load) |
| Operating Temperature Range | β | -40 C to +150 C |
| Protection Features | β | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| Input Logic | β | CMOS-compatible with internal pull-down |
| Status Feedback | β | Yes (status output pin) |
| Automotive Qualification | β | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | β | Compliant / Yes |