BTS3028SDRATMA1 vs BTG70902EPLXUMA1 Comparison
Detailed side-by-side comparison of BTS3028SDRATMA1 by Infineon and BTG70902EPLXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 β ActiveSpecification Comparison
| Parameter | BTS3028SDRATMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.92 | $0.99 |
| Product Type | Smart Low-Side Power Switch | β |
| Topology | 1:1 N-Channel, single channel | β |
| Output Current (max) | 5 A | β |
| On-Resistance RDS(ON) | 28 mΞ© (typ.) | β |
| Load Voltage (max) | 60 V (load-dump rated) | β |
| Operating Supply Voltage | 5 V to 28 V (typ. 13.5 V) | β |
| Logic Input Voltage (IN) | Logic-level, 3.3 V/5 V compatible | β |
| Package | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) | PG-TSDSO-14 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40 Β°C to +150 Β°C (junction) | β |
| Protection Features | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Status Output | Open-drain diagnostic flag | β |
| Automotive Qualification | AEC-Q100 | AEC-Q100 (PROFET+2 family targeted at automotive) |
| RoHS Status | Compliant | Compliant |
| MSL Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |
| Product Family | β | PROFET+2 12V |
| Function | β | Smart High-Side Power Switch |
| Number of Channels | β | 1 |
| Input-to-Output Ratio | β | 1:1 |
| Output Configuration | β | N-Channel High-Side |
| Continuous Load Current | β | 2 A |
| Nominal Operating Voltage | β | 12 V (automotive bus) |
| Operating Voltage Range | β | [DATA_NEEDED: Vbb operating range min/max] |
| On-State Resistance (Ron) | β | [DATA_NEEDED: Rdson typ/max in mohm] |
| Current Limit | β | Fixed (value not specified in retrieved data) |
| Diagnostic Output | β | DEN pin (current sense / fault flag) |
| Enable Input | β | IN pin (active-high) |
| Channel Select | β | DSEL pin |
| Slew Rate Control | β | Yes (internal, for EMI) |
| Operating Junction Temperature | β | -40 C to +150 C |