BTS3046SDRATMA1 vs ITS4100SSJNXUMA1 Comparison
Detailed side-by-side comparison of BTS3046SDRATMA1 by Infineon and ITS4100SSJNXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS3046SDRATMA1 | ITS4100SSJNXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.74 | $0.89 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | High-Side Power Switch |
| Manufacturer | Infineon Technologies | β |
| Switch Configuration | 1:1 N-Channel, single channel | β |
| Continuous Output Current | 3.6 A | β |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | β |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | β |
| Load Type | Low-side switch (ground-referenced load) | β |
| Package | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-DSO-8 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | -40 C to +150 C | [DATA_NEEDED: Tj range] |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | β |
| Input Logic | CMOS-compatible with internal pull-down | β |
| Status Feedback | Yes (status output pin) | β |
| Automotive Qualification | AEC-Q100 (where variant specified) | β |
| RoHS / Lead-Free | Compliant / Yes | β |
| Topology | β | 1:1 N-Channel High-Side |
| Maximum Continuous Load Current | β | 2 A |
| On-State Resistance RDS(on) | β | [DATA_NEEDED: RDS(on) typical value] |
| Operating Supply Voltage Range | β | [DATA_NEEDED: VBB min/max] |
| Overvoltage Protection (Load Dump) | β | Yes |
| Overload Protection | β | Yes |
| Current Limitation | β | Yes |
| Short Circuit Protection | β | Yes |
| Thermal Shutdown with Restart | β | Yes |
| Reverse Battery Protection | β | Yes |
| Fast Demagnetization of Inductive Loads | β | Yes |
| Status / Diagnostic Output | β | Yes |
| RoHS Status | β | Compliant |
| AEC-Q100 Qualification | β | Yes (Automotive Grade) |