BTS3046SDRATMA1 vs ITS716GFUMA1 Comparison
Detailed side-by-side comparison of BTS3046SDRATMA1 by Infineon and ITS716GFUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
ITS716GFUMA1
ITS716GFUMA1 - 4-Ch Smart High-Side Switch 2.3A | Infineon
ITS716GFUMA1 β ActiveSpecification Comparison
| Parameter | BTS3046SDRATMA1 | ITS716GFUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.74 | $3.22 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | Smart High-Side Power Switch |
| Manufacturer | Infineon Technologies | β |
| Switch Configuration | 1:1 N-Channel, single channel | β |
| Continuous Output Current | 3.6 A | β |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | β |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | 5 V to 36 V |
| Load Type | Low-side switch (ground-referenced load) | β |
| Package | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-DSO-20-32 (20-pin SOIC, exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | -40 C to +150 C | -40 C to +85 C (industrial grade) |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | Overload, short-circuit, over-temperature, over-voltage, ESD |
| Input Logic | CMOS-compatible with internal pull-down | β |
| Status Feedback | Yes (status output pin) | β |
| Automotive Qualification | AEC-Q100 (where variant specified) | β |
| RoHS / Lead-Free | Compliant / Yes | β |
| Number of Channels | β | 4 |
| Output Configuration | β | High-side (N-Channel MOSFET) |
| Continuous Current per Channel | β | 2.3 A |
| On-State Resistance (RON) per Channel | β | [DATA_NEEDED: Ron typical value] |
| Load Dump Tolerance | β | Up to 45 V |
| Standby Current | β | [DATA_NEEDED: Iq standby typical] |
| Input Logic Levels | β | CMOS/TTL compatible, parallel interface |
| Diagnostic Output | β | Open-drain fault flag, one per channel |
| PWM Capability | β | Up to 1 kHz |
| Thermal Resistance Junction-to-Ambient | β | [DATA_NEEDED: theta_JA value] |
| MSL Level | β | [DATA_NEEDED: MSL rating] |
| RoHS Status | β | Compliant |