BTS428L2ATMA1 vs BTS3035TFATMA1 Comparison
Detailed side-by-side comparison of BTS428L2ATMA1 by Infineon and BTS3035TFATMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS428L2ATMA1 | BTS3035TFATMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.45 | $0.61 |
| Product Type | Smart High-Side Power Switch | Low-Side Power Switch |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | N-Channel MOSFET |
| Number of Channels | 1 | 1 |
| Input Type | CMOS-compatible, ground-referenced | CMOS Logic Level |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | β |
| Continuous Load Current | 5.8 A | β |
| Operating Supply Voltage | [DATA_NEEDED: nominal and range] | β |
| Standby Current | Very low (per datasheet) | β |
| Overvoltage Protection | Load-dump / overvoltage clamp | β |
| Overtemperature Protection | Yes, with autorestart | β |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | β |
| Package | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-3-313 (DPAK) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | [DATA_NEEDED: min/max] | -40C to +150C (junction) |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | β |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | β |
| Qualification | Automotive-grade (PROFET family) | β |
| Continuous Drain Current | β | 5 A |
| On-Resistance (RDS(on)) | β | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | β | 40 V |
| Operating Voltage Range | β | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | β | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | β | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | β | Integrated |
| MSL Level | β | [DATA_NEEDED: MSL moisture sensitivity level] |
| RoHS Status | β | Compliant |
| Automotive Grade | β | AEC-Q100 qualified |