BTS6143DAUMA1 vs BTS70021EPPXUMA1 Comparison
Detailed side-by-side comparison of BTS6143DAUMA1 by Infineon and BTS70021EPPXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTS6143DAUMA1 - 8A Smart High-Side Switch | Infineon | Automotive PROFET
BTS6143DAUMA1 β ActiveInfineon
BTS70021EPPXUMA1
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 β ActiveSpecification Comparison
| Parameter | BTS6143DAUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.21 | $1.32 |
| Product Type | Smart High-Side Power Switch (PROFET) | β |
| Number of Channels | 1 | β |
| Topology | High-Side | Smart High-Side Switch, N-Channel MOSFET |
| Output Configuration | N-Channel vertical MOSFET | β |
| Nominal Load Voltage (Vbb) | 12 V (automotive) | β |
| Operating Voltage Range (Vbb) | [DATA_NEEDED: operating voltage range] | β |
| Continuous Output Current (IL) | 8 A (typical) | β |
| On-State Resistance (R_DS(on)) | [DATA_NEEDED: typical R_DS(on) in mOhm] | β |
| Short-Circuit Protection | Yes (with latch) | Yes (latched) |
| Current Limitation | Yes | β |
| Overload Protection | Yes | Yes (current limit) |
| Thermal Shutdown | Yes (with auto-restart) | β |
| Overvoltage Protection | Yes (including load dump) | β |
| Loss-of-Ground Protection | Yes | β |
| Loss-of-Vbb Protection | Yes | β |
| Diagnostic Output | Yes (status/fault feedback) | β |
| Operating Temperature Range (Tj) | -40 C to +150 C | β |
| Package | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TSDSO-14-22 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Automotive Grade | Yes (AEC-Q100 qualified PROFET family) | β |
| Product Family | β | PROFET+2 12V |
| Maximum Continuous Load Current | β | 21 A |
| On-State Resistance (RDS(on)) | β | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | β | 6 V to 18 V |
| Transient Supply Voltage | β | 28 V (load dump tolerant) |
| Standby Current | β | [DATA_NEEDED: typical uA value] |
| Current Sense Output (IS) | β | Analog proportional load current |
| Fault Output (DEN/IN) | β | Yes, latched |
| Reverse Polarity Protection | β | Yes (ReverSave) |
| Over-Temperature Protection | β | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | β | Yes |
| Load Dump Clamp Voltage | β | 41 V typical |
| Open-Load Detection | β | Yes (on-state and off-state) |
| PWM Capability | β | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Operating Temperature Range | β | -40 C to +150 C junction |
| Qualification | β | AEC-Q100 automotive qualified |
| RoHS Status | β | Compliant (Green Product) |