BTS700121ESPXUMA2 vs BTS70021EPPXUMA1 Comparison
Detailed side-by-side comparison of BTS700121ESPXUMA2 by Infineon and BTS70021EPPXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTS700121ESPXUMA2 - 31.3A Smart High-Side Power Switch | Infineon
BTS700121ESPXUMA2 β ActiveInfineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 β ActiveSpecification Comparison
| Parameter | BTS700121ESPXUMA2 | BTS70021EPPXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $2.62 | $1.32 |
| Function | Power Switch / Driver 1:1 N-Channel | β |
| Topology | High-Side | Smart High-Side Switch, N-Channel MOSFET |
| Continuous Load Current | 31.3 A | β |
| Family | PROFET (Protected FET) | β |
| Nominal Supply Voltage | 13.5 V | β |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | β |
| On-State Resistance (Ron) | [DATA_NEEDED: Ron typ @ 25 C] | β |
| Number of Channels | 1 | β |
| Package | PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) | PG-TSDSO-14-22 (exposed pad) |
| Number of Terminals | 24 | β |
| Terminal Pitch | 0.65 mm | β |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | -40 C to +150 C | -40 C to +150 C junction |
| Max Junction Temperature | 150 C | β |
| Protection Features | Overload, short-circuit, over-temperature, reverse battery, ground loss | β |
| Diagnostic Output | Analog current sense (IS pin) | β |
| Open-Load Detection | Yes (on-state and off-state) | Yes (on-state and off-state) |
| RoHS Status | Compliant | Compliant (Green Product) |
| Product Family | β | PROFET+2 12V |
| Maximum Continuous Load Current | β | 21 A |
| On-State Resistance (RDS(on)) | β | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | β | 6 V to 18 V |
| Transient Supply Voltage | β | 28 V (load dump tolerant) |
| Standby Current | β | [DATA_NEEDED: typical uA value] |
| Current Sense Output (IS) | β | Analog proportional load current |
| Fault Output (DEN/IN) | β | Yes, latched |
| Reverse Polarity Protection | β | Yes (ReverSave) |
| Overload Protection | β | Yes (current limit) |
| Short-Circuit Protection | β | Yes (latched) |
| Over-Temperature Protection | β | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | β | Yes |
| Load Dump Clamp Voltage | β | 41 V typical |
| PWM Capability | β | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Qualification | β | AEC-Q100 automotive qualified |