BTS70041EPPXUMA1 vs BTS70021EPPXUMA1 Comparison
Detailed side-by-side comparison of BTS70041EPPXUMA1 by Infineon and BTS70021EPPXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 β ActiveInfineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 β ActiveSpecification Comparison
| Parameter | BTS70041EPPXUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.45 | $1.32 |
| Part Family | HIC-PROFET +2 12V | β |
| Switch Type | High-Side N-Channel Smart Power Switch | β |
| Package | PG-TSDSO-14-22 (14-pin) | PG-TSDSO-14-22 (exposed pad) |
| Typical R_DS(on) | 4 mOhm at 25 Β°C | β |
| Nominal Load Current | 15 A (DC) | β |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | β |
| Load-Dump Robustness | [DATA_NEEDED: load dump rating] | β |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | β |
| Diagnostic Enable Pin (DEN) | Yes | β |
| Current Sense Output (IS) | Yes (analog proportional to load current) | Analog proportional load current |
| Embedded Protection | Over-current, short-circuit, over-temperature, reverse battery | β |
| PWM Capability | Yes (low-duty cycle supported via integrated charge pump) | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Operating Temperature | -40 Β°C to +150 Β°C (junction) | β |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | MSL3 (per JEDEC J-STD-020) | β |
| RoHS Status | Compliant | Compliant (Green Product) |
| Automotive Qualification | AEC-Q100 qualified | β |
| Product Family | β | PROFET+2 12V |
| Topology | β | Smart High-Side Switch, N-Channel MOSFET |
| Maximum Continuous Load Current | β | 21 A |
| On-State Resistance (RDS(on)) | β | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | β | 6 V to 18 V |
| Transient Supply Voltage | β | 28 V (load dump tolerant) |
| Standby Current | β | [DATA_NEEDED: typical uA value] |
| Fault Output (DEN/IN) | β | Yes, latched |
| Reverse Polarity Protection | β | Yes (ReverSave) |
| Overload Protection | β | Yes (current limit) |
| Short-Circuit Protection | β | Yes (latched) |
| Over-Temperature Protection | β | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | β | Yes |
| Load Dump Clamp Voltage | β | 41 V typical |
| Open-Load Detection | β | Yes (on-state and off-state) |
| Operating Temperature Range | β | -40 C to +150 C junction |
| Qualification | β | AEC-Q100 automotive qualified |