BTS70402EPGXUMA1 vs 6EDL7141XUMA1 Comparison
Detailed side-by-side comparison of BTS70402EPGXUMA1 by Infineon and 6EDL7141XUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTS70402EPGXUMA1
BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon
BTS70402EPGXUMA1 β Active
Specification Comparison
| Parameter | BTS70402EPGXUMA1 | 6EDL7141XUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $3.18 | $2.05 |
| Manufacturer | Infineon Technologies | β |
| Part Family | PROFET+2 (BTS70xxx series) | β |
| Function | Smart High-Side Power Switch | β |
| Number of Channels | 4 | β |
| Output Configuration | High-side, N-channel MOSFET | β |
| Continuous Load Current per Channel | 3.5 A (typical) | β |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | β |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | β |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | β |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | β |
| Diagnostic Interface | SPI status register, current-sense feedback | β |
| Operating Temperature Range | -40 Β°C to +150 Β°C junction | [DATA_NEEDED: operating temperature range] |
| Package | PG-TSDSO-14 (exposed thermal pad) | PG-VQFN-48-78 (7x7 mm power QFN with exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | β |
| RoHS Compliance | Compliant | β |
| Product Type | β | Three-phase gate driver IC (smart gate driver) |
| Topology | β | Three half-bridge drivers (high-side + low-side) |
| Operating Supply Voltage | β | 5.5 V to 60 V (recommended) |
| Peak Gate Drive Current | β | 1.5 A source / 1.5 A sink |
| Number of Half-Bridges | β | 3 |
| Drive Type | β | Non-Inverting |
| Programmable Drive Voltage | β | Yes (configurable via SPI) |
| Integrated Current Sense Amplifiers | β | 3 (bi-directional low-side, programmable gain) |
| R_DSON Sensing | β | Supported via internal phase-node connections |
| Current Sense Output Compatibility | β | 3.3 V and 5 V logic |
| Communication Interface | β | SPI (digital configuration, >50 parameters) |
| Integrated Bootstrap Diodes | β | Yes |
| Integrated Charge Pump | β | Yes |
| MSL Level | β | [DATA_NEEDED: MSL rating] |
| RoHS Status | β | Compliant (per Infineon product page) |