BTT60302ERAXUMA1 vs BTS70021EPPXUMA1 Comparison
Detailed side-by-side comparison of BTT60302ERAXUMA1 by Infineon and BTS70021EPPXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTT60302ERAXUMA1
BTT60302ERAXUMA1 - 32mΞ© Dual High-Side Switch | Infineon PROFET+
BTT60302ERAXUMA1 β ActiveInfineon
BTS70021EPPXUMA1
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 β ActiveSpecification Comparison
| Parameter | BTT60302ERAXUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $2.18 | $1.32 |
| Product Type | Dual-channel Smart High-Side Power Switch | β |
| Family | PROFET+ 24V | β |
| Number of Channels | 2 | β |
| On-State Resistance (typ, per channel, 25Β°C) | 32 mΞ© | β |
| Continuous Load Current (per channel) | 4 A | β |
| Operating Supply Voltage (Vbb) | 8 V to 36 V | 6 V to 18 V |
| Load-Dump Tolerance | 42 V | β |
| Switch Type | 1:1 N-Channel high-side | β |
| Process Technology | Smart6 (vertical N-MOSFET + charge pump) | β |
| Diagnostic Output | Current sense (IS pin) | β |
| Protection Features | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection | β |
| Automotive Qualification | AEC-Q100 | β |
| Package | PG-TDSO-14-31 (14-pin, exposed pad) | PG-TSDSO-14-22 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40 Β°C to +150 Β°C junction | β |
| Standby Current | [DATA_NEEDED: standby current] | [DATA_NEEDED: typical uA value] |
| RoHS Status | Compliant | Compliant (Green Product) |
| Product Family | β | PROFET+2 12V |
| Topology | β | Smart High-Side Switch, N-Channel MOSFET |
| Maximum Continuous Load Current | β | 21 A |
| On-State Resistance (RDS(on)) | β | 2.6 mOhm typical |
| Transient Supply Voltage | β | 28 V (load dump tolerant) |
| Current Sense Output (IS) | β | Analog proportional load current |
| Fault Output (DEN/IN) | β | Yes, latched |
| Reverse Polarity Protection | β | Yes (ReverSave) |
| Overload Protection | β | Yes (current limit) |
| Short-Circuit Protection | β | Yes (latched) |
| Over-Temperature Protection | β | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | β | Yes |
| Load Dump Clamp Voltage | β | 41 V typical |
| Open-Load Detection | β | Yes (on-state and off-state) |
| PWM Capability | β | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Operating Temperature Range | β | -40 C to +150 C junction |
| Qualification | β | AEC-Q100 automotive qualified |