EP1K30TI144-3N vs EP1K30TI144-2NGA Comparison
Detailed side-by-side comparison of EP1K30TI144-3N by Altera and EP1K30TI144-2NGA by Altera. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | EP1K30TI144-3N | EP1K30TI144-2NGA |
|---|---|---|
| Brand | Altera | Altera |
| Category | FPGA & CPLD | FPGA & CPLD |
| Lifecycle Status | Nrnd | Obsolete |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $21.80 | $18.20 |
| Family | ACEX 1K | β |
| Series | EP1K30 | ACEX 1K |
| Logic Elements | 1,728 | β |
| Typical Gates | 30,000 | β |
| Usable Gates | 17,500 | β |
| Embedded Memory (EAB) | 24 Kbit (6 EABs of 4 Kbit each) | β |
| Maximum User I/O Pins | 102 | β |
| Dedicated Input Pins | 6 | β |
| Total Terminals | 144 | β |
| Package | TQFP-144 (0.5 mm pitch) | β |
| Core Supply Voltage | 2.5 V nominal (2.375 V min, 2.625 V max) | β |
| Speed Grade | -3 (fastest in EP1K30 family) | -2 (faster than -3) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Process Technology | 0.18 um CMOS, 4 metal layers | 0.18 um SRAM CMOS |
| Configuration Modes | Passive Serial, Passive Parallel Async, Passive Parallel Sync, JTAG (IEEE 1149.1) | β |
| PLLs | 4 | β |
| Mounting Type | Surface Mount (Gull-Wing) | Surface Mount |
| Thermal Resistance (theta_JA) | Approximately 35-40 C/W (PCB-dependent) | β |
| RoHS Status | [DATA_NEEDED: RoHS status] | β |
| Logic Elements / Cells | β | 1728 |
| Total RAM Bits | β | 24576 |
| Number of Logic Array Blocks (LABs) | β | 216 |
| Number of I/O | β | 102 |
| Number of Gates (typical) | β | 119000 |
| Core Voltage (VCCINT) | β | 2.5 V |
| I/O Supply Voltage (VCCIO) | β | 3.3 V |
| Package / Case | β | 144-LFQFP / 144-TQFP (20x20 mm) |
| Programmable Logic Type | β | In-system programmable SRAM FPGA |
| Lead Free / RoHS Status | β | Lead free / RoHS compliant per suffix code |
| Design Software | β | Quartus II, MAX+PLUS II |
| JTAG Support | β | Yes (IEEE 1149.1 boundary scan) |
| Configuration | β | SRAM-based, requires configuration device at power-up |