EPC1441PI8N vs EPC1441PS8 Comparison

Detailed side-by-side comparison of EPC1441PI8N by Altera and EPC1441PS8 by Intel. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Altera
EPC1441PI8N EPC1441PI8N - 440Kb OTP Config PROM, 8-PDIP | Altera / Intel

EPC1441PI8N - 440Kb OTP Config PROM, 8-PDIP | Altera / Intel

EPC1441PI8N ⚠ Last Time Buy

Specification Comparison

Parameter EPC1441PI8N EPC1441PS8
Brand Altera Intel
Category Memory ICs Memory ICs
Lifecycle Status Last_time_buy Nrnd
Stock Status In Stock In Stock
Unit Price (USD) $3.55 $3.32
Memory Type OTP Configuration PROM (poly-fuse) One-Time-Programmable Flash
Memory Capacity 440,800 bits (440 Kbit) β€”
Configuration Interface Altera Serial (PS) configuration β€”
Supply Voltage VCC 5.0 V nominal (4.75 V to 5.25 V) β€”
Active Supply Current ICC [DATA_NEEDED: typical active ICC] β€”
Standby Supply Current ICCSTBY approximately 50 uA β€”
Programming Method Off-board PROM programmer (poly-fuse OTP) β€”
Configuration Time <100 ms typical for FLEX10KA loading β€”
Operating Temperature -40C to +85C (industrial) β€”
Package 8-pin PDIP (Plastic DIP, through-hole) SOIC-8 (PS8, 150-mil body)
Pin Count 8 β€”
Mounting Type Through-hole (THT) Surface Mount
Lead-Free / RoHS Non-RoHS (legacy through-hole); check suffix for Pb-free option β€”
Compatible FPGA Families FLEX10K, FLEX10KA, FLEX6000, APEX20K series APEX II, APEX 20K (including 20K, 20KC, 20KE), Mercury, ACEX 1K, FLEX 6000, FLEX 10KE, FLEX 10KA
Family Position Top-of-family (largest density: 440Kb) β€”
Programming Voltage [DATA_NEEDED: VPP programming voltage] β€”
Endurance One-time programmable (no reprogram cycles) β€”
Product Type β€” Enhanced Configuration PROM (serial configuration memory)
Memory Density β€” 440 Kbit
Interface β€” 4-pin serial (nCS, OE, DATA, DCLK)
Supply Voltage β€” 3.3 V typical (compatible with Altera FPGAs)
Configuration Controller β€” Built-in (handles address counter, oscillator, tri-state DATA)
Output Driver β€” Tri-state on DATA pin
Configuration Speed β€” Higher DCLK rates vs legacy EPC PROMs (per Altera datasheet)
DC Input Absolute Min β€” -0.3 V (with -2.0 V undershoot tolerance < 20 ns)
DC Input Absolute Max β€” 7.0 V (with overshoot tolerance < 20 ns)
Operating Temperature Range β€” [DATA_NEEDED: operating temperature range]
RoHS Status β€” unknown
Programmability β€” OTP (one-time-programmable)

Datasheets & Resources

Browse All Products Create BOM Request Quote