EPC16U188N vs EPC16UC88 Comparison
Detailed side-by-side comparison of EPC16U188N by Altera and EPC16UC88 by Altera. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Altera
EPC16U188N
EPC16U188N - 16Mb Altera Enhanced Configuration Device | FPGA
EPC16U188N β ActiveSpecification Comparison
| Parameter | EPC16U188N | EPC16UC88 |
|---|---|---|
| Brand | Altera | Altera |
| Category | FPGA & CPLD | Memory ICs |
| Lifecycle Status | Active | Unknown |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $19.95 | $0.00 |
| Memory Type | In-System Programmable Configuration PROM | β |
| Memory Density | 16 Mbit | β |
| FPGA Family Support | Altera Cyclone, Stratix, APEX series | β |
| Configuration Modes | FPP, PS, AS, JTAG | β |
| Decompression | Built-in (multiplier 1x, 2x, 4x) | β |
| Interface | Parallel Flash Interface (PIA), JTAG (IEEE 1149.1) | β |
| I/O Voltage Support | 1.8V, 2.5V, 3.3V, 5.0V | β |
| Endurance | 100,000 erase/program cycles | β |
| Data Retention | 20 years | β |
| Package | 188-ball Ultra FineLine BGA (UBGA) | 88-UBGA (11x8) |
| Operating Temperature | -40C to +85C | [DATA_NEEDED: operating temperature] |
| Mounting Type | Surface Mount (BGA) | Surface mount |
| Programming Interface | IEEE 1149.1 JTAG | β |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| MSL Level | 3 (168 hours) | β |
| Device Type | β | In-system programmable configuration PROM for FPGAs |
| Configuration Memory Capacity | β | 16 Mb |
| Supply Voltage | β | 3.3 V core and I/O |
| Package Family | β | UBGA |
| In-System Programmability | β | IEEE Std. 1532 compatible |
| Programming Language Support | β | Jam Standard Test and Programming Language (STAPL) |
| JTAG Boundary Scan | β | Supported |
| nINIT_CONF Function | β | Allows private JTAG instruction to start FPGA configuration |
| Configuration Architecture | β | Configuration controller and flash memory |
| FPGA Configuration Use | β | Automatic configuration after power-up or system initialization |
| Data Output | β | Configuration data output controlled by OE and nCS |
| Output Control | β | OE and nCS control tri-state buffer and address counter |
| Package Dimensions | β | 11 mm x 8 mm |
| REACH Status | β | [DATA_NEEDED: REACH status] |
| Output Current | β | [DATA_NEEDED: output current] |
| Configuration Frequency | β | [DATA_NEEDED: configuration frequency] |
| AEC-Q100 Qualification | β | [DATA_NEEDED: AEC-Q100 qualification] |