EPC1PC8CC vs EPC1PC8 Comparison
Detailed side-by-side comparison of EPC1PC8CC by Intel and EPC1PC8 by Altera. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | EPC1PC8CC | EPC1PC8 |
|---|---|---|
| Brand | Intel | Altera |
| Category | Memory ICs | Memory ICs |
| Lifecycle Status | Obsolete | Obsolete |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $9.95 | $4.10 |
| Memory Size | 1 Mbit (1,048,576 bits) | 1 Mbit (1,048,576 bits) |
| Memory Type | EPROM (OTP, UV-erasable window optional) | OTP Configuration PROM (Non-volatile) |
| Function | FPGA Configuration PROM | β |
| Configuration Interface | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) | Altera proprietary serial (DATA, DCLK, OE, nCS) |
| Supply Voltage VCC | 3.0 V to 3.6 V (typical 3.3 V) | β |
| Maximum DCLK Frequency | 17.6 MHz (17.6 Mb/s effective bitstream rate) | β |
| Operating Temperature Range | [DATA_NEEDED: full industrial range from datasheet] | β |
| Package | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) | 8-pin PDIP (8-PDIP, 300 mil) |
| Mounting Type | Through-Hole (DIP socketable) | Through-Hole (THT) |
| Cascade Support | Not supported in DIP-8 package (nCASC pin not exposed) | β |
| Programming Interface | JTAG via Altera Quartus / Quartus Prime ByteBlaster | β |
| Error Detection | Built-in CRC during configuration transfer | β |
| MSL Level | 1 (unlimited floor life) | [DATA_NEEDED: moisture sensitivity level] |
| Lead-Free / RoHS | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant | β |
| Compatible FPGA Families | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria | β |
| Pin Count | 8 | β |
| Supply Voltage (VCC) | β | 5.0 V (typical) |
| Programmability | β | One-Time Programmable (OTP) |
| Target FPGAs | β | ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A |
| Pin Pitch | β | 2.54 mm (0.100 in) |
| Operating Temperature | β | 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range] |
| Programming Hardware | β | Altera MasterBlaster / ByteBlaster (legacy programmer) |
| Configuration Mode | β | Serial (1-bit data, 1-bit clock) |
| RoHS Status | β | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free | β | [DATA_NEEDED: lead-free / SnPb plating] |