IR2132STRPBF vs IR2132SPBF Comparison
Detailed side-by-side comparison of IR2132STRPBF by Infineon and IR2132SPBF by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
IR2132SPBF
IR2132SPBF - 600V 3-Phase Half-Bridge Gate Driver | Infineon
IR2132SPBF β ActiveSpecification Comparison
| Parameter | IR2132STRPBF | IR2132SPBF |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $4.95 | $5.55 |
| Configuration | 3-Phase Bridge | Inverting input |
| Driver Type | Half-Bridge Gate Driver, Inverting Input | β |
| Number of Drivers | 6 (3 high-side + 3 low-side) | β |
| Offset Voltage (Max) | 600 V | β |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Source Current (Typ.) | 250 mA | β |
| Sink Current (Typ.) | 500 mA | β |
| Propagation Delay (Typ.) | 675 ns | β |
| Internal Dead-Time (Typ.) | 0.8 Β΅s | β |
| Input Logic | Inverting (HIN/LIN active-low) | β |
| Bootstrap Architecture | Yes (floating high-side channel) | β |
| Undervoltage Lockout (UVLO) | Yes, on all channels | Yes, all 6 channels |
| Over-Current Protection | Yes, with ITRIP input and FAULT output | β |
| Integrated Op-Amp | Yes (current-sense amplifier) | β |
| Fault Output | Yes, active-low latched FAULT pin | β |
| dV/dt Immunity | Yes (negative transient tolerant) | Yes |
| Package | 28-SOICWB (0.295 inch / 7.50 mm width) | 28-SOIC (Wide Body, 7.50 mm) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| RoHS Status | Compliant (PBF suffix) | β |
| Part Number | β | IR2132SPBF |
| Manufacturer | β | Infineon Technologies (formerly International Rectifier) |
| Function | β | Half-Bridge Gate Driver IC (3-phase, 6-channel) |
| Number of Outputs | β | 6 (3 high-side, 3 low-side) |
| Maximum Offset Voltage (High-Side) | β | 600 V |
| Output Current (Source/Sink) | β | 0.5 A |
| Logic Input Compatibility | β | CMOS/LSTTL, down to 2.5 V logic |
| Typical Deadtime | β | 0.8 us |
| Bootstrap Design | β | Required for high-side channels |
| Negative VS Transient Tolerance | β | Yes |
| Lead-Free / RoHS | β | Yes (PbF suffix, RoHS compliant) |
| Packaging | β | Tube |
| Topology | β | 3-phase bridge driver for MOSFETs/IGBTs |