ITS716GFUMA1 vs BTS3046SDRATMA1 Comparison
Detailed side-by-side comparison of ITS716GFUMA1 by Infineon and BTS3046SDRATMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
ITS716GFUMA1
ITS716GFUMA1 - 4-Ch Smart High-Side Switch 2.3A | Infineon
ITS716GFUMA1 β Active
Specification Comparison
| Parameter | ITS716GFUMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $3.22 | $0.74 |
| Product Type | Smart High-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Number of Channels | 4 | β |
| Output Configuration | High-side (N-Channel MOSFET) | β |
| Continuous Current per Channel | 2.3 A | β |
| On-State Resistance (RON) per Channel | [DATA_NEEDED: Ron typical value] | β |
| Operating Voltage Range (Vbb) | 5 V to 36 V | 4.5 V to 42 V |
| Load Dump Tolerance | Up to 45 V | β |
| Standby Current | [DATA_NEEDED: Iq standby typical] | β |
| Input Logic Levels | CMOS/TTL compatible, parallel interface | β |
| Diagnostic Output | Open-drain fault flag, one per channel | β |
| Protection Features | Overload, short-circuit, over-temperature, over-voltage, ESD | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| PWM Capability | Up to 1 kHz | β |
| Operating Temperature Range | -40 C to +85 C (industrial grade) | -40 C to +150 C |
| Package | PG-DSO-20-32 (20-pin SOIC, exposed pad) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Thermal Resistance Junction-to-Ambient | [DATA_NEEDED: theta_JA value] | β |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | [DATA_NEEDED: MSL rating] | β |
| RoHS Status | Compliant | β |
| Manufacturer | β | Infineon Technologies |
| Switch Configuration | β | 1:1 N-Channel, single channel |
| Continuous Output Current | β | 3.6 A |
| On-State Resistance (Rds(on)) | β | 95 mOhm (0.095 ohm) typical |
| Load Type | β | Low-side switch (ground-referenced load) |
| Input Logic | β | CMOS-compatible with internal pull-down |
| Status Feedback | β | Yes (status output pin) |
| Automotive Qualification | β | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | β | Compliant / Yes |