TLE75004EPDXUMA1 vs ITS4090QEPDXUMA1 Comparison

Detailed side-by-side comparison of TLE75004EPDXUMA1 by Infineon and ITS4090QEPDXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Infineon
TLE75004EPDXUMA1

TLE75004EPDXUMA1 - 4-Ch Low-Side SPI Switch, 470mA | Infineon

TLE75004EPDXUMA1 βœ“ Active
Infineon
ITS4090QEPDXUMA1

ITS4090QEPDXUMA1 - 90mΞ© Quad Smart High-Side Switch | Infineon

ITS4090QEPDXUMA1 βœ“ Active

Specification Comparison

Parameter TLE75004EPDXUMA1 ITS4090QEPDXUMA1
Brand Infineon Infineon
Category Power MOSFET Drivers Power Distribution Switches
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $0.93 $1.62
Product Type Low-side power switch Quad-Channel Smart High-Side Power Switch
Number of Channels 4 4
On-State Resistance (Rdson) per Channel [DATA_NEEDED: Rdson per channel] β€”
Continuous Drain Current per Channel 470 mA β€”
Load Voltage (Vbb) [DATA_NEEDED: Vbb max] β€”
Number of Outputs 4 β€”
Input Type SPI (16-bit) + parallel input pins β€”
SPI Clock Frequency up to 5 MHz β€”
Operating Temperature Range -40 Β°C to +150 Β°C -40 Β°C to +150 Β°C (Tj)
Package PG-TSDSO-14-41 (exposed pad) PG-TSDSO-14 (exposed pad)
Mounting Type Surface Mount Surface Mount
MSL Level 2A [DATA_NEEDED: MSL rating]
Terminal Finish Tin (Sn) β€”
JEDEC / JESD-609 e3 β€”
Qualification AEC-Q100 β€”
Special Features 3 V cranking, Limp Home (fail-safe) mode, open-load detection β€”
Family β€” PROFET (PROtected FET) 24V/48V
Topology β€” High-Side Switch (N-Channel DMOS)
Typical RDS(ON) per Channel β€” 90 mΞ©
RDS(ON) at Tj = 125 Β°C β€” 140 mΞ© (typical)
Nominal Continuous Output Current per Channel β€” 750 mA
Minimum Current per Channel β€” 500 mA
Supply Voltage Range (Operating) β€” 4.5 V to 45 V
Supply Voltage Range (Absolute Maximum) β€” -0.3 V to 45 V
On-State Input Voltage (Logic High) β€” [DATA_NEEDED: VIH threshold]
Diagnostic Feedback β€” Current-sense IS pin (analog proportional to load)
Protection Features β€” Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor)
PWM Capability β€” Up to 1 kHz (typical)
RoHS Status β€” Compliant

Datasheets & Resources

Browse All Products Create BOM Request Quote