TLE94112ESXUMA1 vs TLE9104SHXUMA1 Comparison

Detailed side-by-side comparison of TLE94112ESXUMA1 by Infineon and TLE9104SHXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Infineon
TLE94112ESXUMA1

TLE94112ESXUMA1 - 12-Fold Half-Bridge DC Motor Driver | Infineon

TLE94112ESXUMA1 βœ“ Active
Infineon
TLE9104SHXUMA1

TLE9104SHXUMA1 - 4-Ch 3A SPI Low-Side Switch | Infineon

TLE9104SHXUMA1 βœ“ Active

Specification Comparison

Parameter TLE94112ESXUMA1 TLE9104SHXUMA1
Brand Infineon Infineon
Category Motor Drivers Power MOSFET Drivers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $1.10 $3.72
Output Configuration 12 half-bridge drivers β€”
Number of Outputs 12 β€”
Output Current per Channel 0.9 A (typical, see datasheet) β€”
Supply Voltage VS 5.5 V to 18 V β€”
Load-Dump Tolerance Up to 40 V (per family datasheet) β€”
Interface SPI (daisy-chainable up to 16 devices) β€”
Topology Support Half-bridge, full-bridge, parallel outputs β€”
On-State Resistance (Rdson) [DATA_NEEDED: Rdson per channel] β€”
Operating Temperature -40 C to +150 C -40 Β°C to +150 Β°C (junction)
Protection Features Over-temperature, over-current, open-load, short to GND/VBAT Over-current, Over-temperature, Over-load, short-to-ground, open-load detection
Package PG-TSDSO-24 (exposed pad) PG-DSO-20-88 (20-pin BFSOP with exposed pad)
Mounting Type Surface Mount Surface Mount
MSL Level [DATA_NEEDED: MSL rating] MSL3 (per JEDEC J-STD-020)
Standard Pack Quantity 3000 (Tape & Reel) β€”
Application Family TLE94xyz DC motor driver family β€”
Product Type β€” Multi-Channel Low-Side Power Switch
Number of Channels β€” 4
Load Current per Channel β€” 3 A (continuous)
Topology β€” 1:1 N-Channel Low-Side Switch
Supply Voltage Range (VDD) β€” 4.5 V to 28 V
Logic Reference (VIO) β€” 3.3 V / 5 V compatible
Communication Interface β€” 16-bit SPI
R_DS(on) per Channel β€” [DATA_NEEDED: typical R_DS(on) in mohm]
Diagnostic Output β€” SPI status registers (per-channel fault flags)
Automotive Qualification β€” AEC-Q100 qualified (automotive grade)
RoHS / Lead-Free β€” RoHS compliant, lead-free
Reset Pin (RESN) β€” Active-low with configurable reset duration

Datasheets & Resources

Browse All Products Create BOM Request Quote