5962-01-413-5236 - Military Op Amp AD827SE/883B | Analog Devices
MPN: 5962-01-413-5236 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $45 | $45.00 |
| 10 | $40 | $400.00 |
| 100 | $35 | $3,500.00 |
| 500 | $30 | $15,000.00 |
| 1,000 | $25 | $25,000.00 |
Drop-in alternatives for 5962-01-413-5236 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
AD827SQ/883B
✅ Drop-In✓ In Stock
$72.5 / Unit
View Datasheet →AD827AQ
✅ Drop-In📋 Reference alternative (not in catalog)
5962-9211701M2X
✅ Drop-In📋 Reference alternative (not in catalog)
5962-01-413-5236 Maximum Ratings & Electrical Characteristics
| Number of Channels | 2 |
| Supply Voltage Range | ±5 V to ±15 V |
| Slew Rate | 300 V/µs (typical) |
| Unity-Gain Bandwidth | 50 MHz (typical) |
| Low Distortion | -72 dBc at 5 MHz |
| Supply Current per Amplifier | 10 mA (typical) |
| Input Offset Voltage | [DATA_NEEDED: Input Offset Voltage] |
| Input Bias Current | [DATA_NEEDED: Input Bias Current] |
| Operating Temperature Range | -55°C to +125°C |
| Package Type | 8-pin CERDIP |
| Mounting Type | Through-Hole |
| Military Grade | MIL-STD-883B |
| RoHS Status | unknown |
| Lead-Free | unknown |
| NSN | 5962-01-413-5236 |
5962-01-413-5236 Pin Configuration
| Pin 1 | OUT A — Output of amplifier A |
| Pin 2 | -IN A — Inverting input of amplifier A |
| Pin 3 | +IN A — Non-inverting input of amplifier A |
| Pin 4 | V- — Negative supply voltage |
| Pin 5 | +IN B — Non-inverting input of amplifier B |
| Pin 6 | -IN B — Inverting input of amplifier B |
| Pin 7 | OUT B — Output of amplifier B |
| Pin 8 | V+ — Positive supply voltage |
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this component. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
5962-01-413-5236 is suitable for 6 applications: Radar Signal Processing, Avionics Control Systems, Missile Guidance Electronics, High-Speed ADC Driver, Military Communication Systems, Test and Measurement Instrumentation.
Radar Signal Processing
The AD827SE/883B's high slew rate of 300 V/µs and 50 MHz bandwidth make it ideal for radar signal processing, where fast pulse amplification and high dynamic range are required. Its low distortion ensures accurate signal reproduction in Doppler and synthetic aperture radar systems. The military temperature range allows operation in harsh environments. In this application, the op amp is used in the IF amplifier stage to boost weak radar returns before digitization, maintaining signal integrity over a wide bandwidth.
Recommended
Avionics Control Systems
In avionics, the AD827SE/883B provides reliable amplification for flight control sensors and actuator feedback loops. Its MIL-STD-883B qualification ensures it meets the stringent reliability requirements of airborne systems. The op amp's wide bandwidth and low distortion are essential for accurate servo control and vibration monitoring. It operates from ±15 V supplies commonly found in avionics, and its hermetic CERDIP package protects against moisture and altitude effects.
Recommended
Missile Guidance Electronics
The AD827SE/883B is used in missile guidance systems for signal conditioning of inertial navigation sensors and seeker electronics. Its high slew rate and low distortion are critical for processing fast-changing guidance commands. The device's wide operating temperature range (-55°C to +125°C) ensures performance in extreme thermal environments encountered during flight. The op amp's dual-channel configuration saves board space in compact guidance electronics.
Recommended
High-Speed ADC Driver
The AD827SE/883B is an excellent choice for driving high-speed ADCs, such as the AD6645, in communication and instrumentation systems. Its 50 MHz bandwidth and low distortion ensure that the ADC receives a clean, high-fidelity signal, maximizing the effective number of bits (ENOB). The op amp's high slew rate prevents slew-induced distortion at high input frequencies. In this application, it is configured as a single-ended to differential converter or a buffer amplifier.
Recommended
Military Communication Systems
In military communication systems, the AD827SE/883B is used in IF and baseband signal processing chains. Its low distortion of -72 dBc at 5 MHz is essential for maintaining signal quality in QAM and OFDM modulation schemes. The op amp's wide bandwidth supports high data rates, while its military-grade reliability ensures secure and uninterrupted communication. It is commonly found in software-defined radios and tactical communication equipment.
Recommended
Test and Measurement Instrumentation
The AD827SE/883B is used in high-speed test equipment such as oscilloscopes, spectrum analyzers, and signal generators. Its high slew rate and bandwidth allow it to amplify fast transient signals without distortion. The device's low noise and distortion characteristics are critical for accurate measurements. In this application, it is often used in the input amplifier stage or as a buffer for high-speed DACs and ADCs.
Recommended
Recommended Products Summary
Engineering reference data for 5962-01-413-5236 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD827SQ/883B | AD827AQ | OP249GSZ | LT1364CN8 | 5962-9211701M2X |
|---|---|---|---|---|---|---|
| Package | 8-pin CERDIP | 8-pin CERDIP | 8-pin CERDIP | 8-pin SOIC | 8-pin DIP | 8-pin CERDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Linear Technology | DLA Land and Maritime |
| Slew Rate | 300 V/µs | 300 V/µs | 300 V/µs | 22 V/µs | 1000 V/µs | [DATA_NEEDED] |
| Bandwidth | 50 MHz | 50 MHz | 50 MHz | 4.7 MHz | 70 MHz | [DATA_NEEDED] |
| Supply Voltage Range | ±5 V to ±15 V | ±5 V to ±15 V | ±5 V to ±15 V | ±4.5 V to ±18 V | ±2.5 V to ±15 V | [DATA_NEEDED] |
| Temperature Range | -55°C to +125°C | -55°C to +125°C | -40°C to +85°C | -40°C to +85°C | 0°C to +70°C | [DATA_NEEDED] |
| Military Grade | Yes (MIL-STD-883B) | Yes (MIL-STD-883B) | No | No | No | Yes (MIL-STD-883B) |
| Distortion | -72 dBc at 5 MHz | -72 dBc at 5 MHz | -72 dBc at 5 MHz | [DATA_NEEDED] | -90 dBc at 1 MHz | [DATA_NEEDED] |
Key Differentiators
- Military-grade qualification (vs AD827AQ)
- High slew rate and bandwidth (vs OP249GSZ)
- Low distortion (vs LT1364CN8)
Design Notes
The AD827SE/883B requires dual power supplies of ±5 V to ±15 V. Use 0.1 µF ceramic capacitors close to each supply pin (pins 4 and 8) and 10 µF tantalum capacitors at the board level to decouple low-frequency noise. Proper decoupling is critical to maintain the high slew rate and bandwidth without oscillation.
For high-frequency operation, use a ground plane and minimize trace lengths to reduce parasitic inductance and capacitance. Keep input and output traces short and avoid routing them near high-speed digital lines. Use surface-mount components where possible to reduce lead inductance. Follow the layout guidelines in the AD827 datasheet for optimal performance.
The high slew rate of 300 V/µs can cause ringing or oscillation if the output is not properly terminated. Use a series resistor of 50-100 Ω at the output if driving capacitive loads. Also, ensure that the input common-mode voltage does not exceed the supply rails, as this can cause latch-up. Refer to the datasheet for absolute maximum ratings.
Compliance Information
Military-grade parts may be exempt from RoHS due to hermetic sealing and reliability requirements. Compliance data not available from provided sources.
