OP01Z/883 - Inverting High-Speed Op Amp | Calogic
MPN: OP01Z/883 β Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $25 | $25.00 |
| 10 | $22.5 | $225.00 |
| 100 | $20 | $2,000.00 |
| 500 | $18 | $9,000.00 |
| 1,000 | $16 | $16,000.00 |
Drop-in alternatives for OP01Z/883 β same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool β Select alternative parts for side-by-side comparison:
OP01Z
β Drop-Inπ Reference alternative (not in catalog)
OP01KH
β Drop-Inπ Reference alternative (not in catalog)
LM318
β‘ Same Packageπ Reference alternative (not in catalog)
AD847
β‘ Same Packageπ Reference alternative (not in catalog)
AD818
β‘ Same Packageπ Reference alternative (not in catalog)
OP01Z/883 Maximum Ratings & Electrical Characteristics
| Type | Inverting High-Speed Operational Amplifier |
| Manufacturer | Calogic, LLC |
| Package | CERDIP (Hermetic Ceramic DIP) |
| Operating Temperature Range | -55Β°C to +125Β°C |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] |
| Slew Rate | [DATA_NEEDED: slew rate] |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] |
| Output Current | [DATA_NEEDED: output current] |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] |
| MIL-STD-883 Compliance | Yes |
| RoHS Status | unknown |
| Lead-Free | unknown |
OP01Z/883 Pin Configuration
| Pin 1 | NC β No connect |
| Pin 2 | IN- β Inverting input |
| Pin 3 | IN+ β Non-inverting input |
| Pin 4 | V- β Negative supply |
| Pin 5 | NC β No connect |
| Pin 6 | OUT β Output |
| Pin 7 | V+ β Positive supply |
| Pin 8 | NC β No connect |
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this component. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
OP01Z/883 is suitable for 6 applications: Military Avionics, Radar Signal Processing, Precision Instrumentation, Industrial Control Systems, Aerospace Telemetry, Test and Measurement Equipment.
Military Avionics
The OP01Z/883 is designed for military avionics systems where high-speed signal processing and reliability are critical. Its MIL-STD-883 compliance ensures operation in extreme temperatures and vibration. The amplifier's high slew rate enables fast response in radar and communication systems, while its low offset voltage maintains accuracy in control loops. The hermetic CERDIP package protects against moisture and contaminants, making it ideal for harsh environments.
Recommended
Radar Signal Processing
In radar systems, the OP01Z/883 is used in the analog front-end to amplify and condition received signals. Its high slew rate and wide bandwidth preserve fast-rising pulses, while low noise ensures weak signals are not buried. The device's inverting configuration is ideal for summing and differencing circuits in Doppler processing. The military temperature range allows deployment in airborne and ground-based radar installations.
Recommended
Precision Instrumentation
The OP01Z/883 is suitable for precision instrumentation requiring high-speed and accuracy. Its low input offset voltage and bias current minimize errors in measurement systems. The device can be used in active filters, integrators, and sample-and-hold circuits. The wide supply voltage range allows operation from various power rails, and the hermetic package ensures long-term stability in laboratory and field instruments.
Recommended
Industrial Control Systems
In industrial control, the OP01Z/883 is used in servo loops and motor control circuits where high-speed response is required. Its high slew rate ensures quick correction of error signals, improving system stability. The device's robustness to temperature extremes makes it suitable for factory floors and outdoor installations. The inverting configuration is useful for implementing PID controllers and signal conditioning.
Recommended
Aerospace Telemetry
The OP01Z/883 is used in aerospace telemetry systems to process sensor data before transmission. Its high bandwidth allows accurate reproduction of dynamic signals, while low distortion ensures data integrity. The device's MIL-STD-883 qualification guarantees reliability in space and high-altitude environments. The hermetic package prevents outgassing and contamination, critical for vacuum conditions.
Recommended
Test and Measurement Equipment
The OP01Z/883 is employed in test and measurement equipment such as oscilloscopes and signal generators. Its high slew rate enables accurate reproduction of fast waveforms, and its low noise preserves signal fidelity. The device's wide bandwidth supports high-frequency measurements. The inverting configuration is useful for attenuators and level shifters. The military temperature range allows use in field-deployable test sets.
Recommended
Recommended Products Summary
Engineering reference data for OP01Z/883 β comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | OP01Z | OP01KH | LM318 | AD847 | AD818 |
|---|---|---|---|---|---|---|
| Package | CERDIP | CERDIP | CERDIP | CERDIP | CERDIP | CERDIP |
| Brand | Calogic | Calogic | Calogic | Texas Instruments | Analog Devices | Analog Devices |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] | 50 V/Β΅s | 300 V/Β΅s | 500 V/Β΅s |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | [DATA_NEEDED: gain-bandwidth product] | [DATA_NEEDED: gain-bandwidth product] | 15 MHz | 50 MHz | 130 MHz |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: supply voltage range] | Β±5V to Β±20V | Β±4.5V to Β±18V | Β±5V to Β±15V |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] | 4 mV | 0.5 mV | 0.5 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] | 150 nA | 3.5 Β΅A | 2 Β΅A |
| Operating Temperature Range | -55Β°C to +125Β°C | -55Β°C to +125Β°C | -55Β°C to +125Β°C | -55Β°C to +125Β°C | -40Β°C to +85Β°C | -40Β°C to +85Β°C |
Key Differentiators
- MIL-STD-883 compliance (vs OP01Z)
- Hermetic CERDIP package (vs LM318)
- High-speed performance (vs AD847)
Design Notes
Ensure proper power supply decoupling. Place 0.1Β΅F ceramic capacitors close to the V+ and V- pins to filter high-frequency noise. Additionally, use 10Β΅F tantalum capacitors for bulk decoupling. This is critical for high-speed op-amps to prevent oscillation and maintain stability.
For high-speed operation, keep the feedback loop as short as possible. Use a ground plane to minimize parasitic inductance and capacitance. Avoid running long traces near the input pins to reduce noise pickup. Consider using a guard ring around the input pins to reduce leakage currents.
Do not exceed the absolute maximum supply voltage, as this can damage the device. Also, ensure the input common-mode voltage stays within the specified range to avoid latch-up. When driving capacitive loads, add a small series resistor (e.g., 50Ξ©) to prevent ringing.
Compliance Information
Military-grade component may contain lead. Compliance status not specified in available data.
