BQ500414Q - Automotive Qi Wireless Power Controller | Texas Instruments
MPN: BQ500414Q ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
Drop-in alternatives for BQ500414Q — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
BQ500414QRGZTQ1
✅ Drop-In📋 Reference alternative (not in catalog)
BQ500414QRGZRQ1
✅ Drop-In📋 Reference alternative (not in catalog)
BQ500414Q Maximum Ratings & Electrical Characteristics
| Type | Wireless Power Transmitter PMIC |
| Package | 48-VQFN (7x7 mm) |
| Pin Count | 48 |
| Operating Temperature Range | -40°C to 85°C |
| Qualification | AEC-Q100 |
| Wireless Standard | Qi (WPC v1.1) |
| Transmitter Type | A6 |
| Supply Voltage | 12 V (typical), other voltages supported |
| LED Outputs | 3 (pins 7, 8, 9) |
| LED Current Limit Resistor | 470 Ω (typical) |
| Interface | I2C |
| Free Positioning | Yes |
| Mounting Type | Surface Mount |
| RoHS Status | unknown |
| Output Frequency | [DATA_NEEDED: output frequency] |
BQ500414Q 48-vqfn (7x7 mm) Pin Configuration Guide
Complete pinout information for BQ500414Q (48-vqfn (7x7 mm) package) with 48 pins. This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for BQ500414Q.
Refer to the datasheet for full pin configuration.
Estimated pin count: 48 pins (digital package)
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this digital IC. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
BQ500414Q is suitable for 6 applications: Automotive In-Cabin Wireless Charger, Aftermarket Wireless Charging Pad, Industrial Wireless Power Receiver Module, Smart Home Charging Station, Medical Device Wireless Power Transmitter, Portable Wireless Charging Accessory.
Automotive In-Cabin Wireless Charger
The BQ500414Q is optimized for 12-V automotive power systems and AEC-Q100 qualified, making it ideal for in-cabin wireless phone chargers. Its free-positioning capability allows the driver to place a Qi-enabled phone anywhere on the charging pad, and the three LED outputs provide charge status feedback. The I2C interface enables the host ECU to monitor and control the charging session, ensuring safe operation under varying vehicle conditions.
Recommended
Aftermarket Wireless Charging Pad
For aftermarket wireless charging pads, the BQ500414Q provides a compact controller solution with minimal external components. The integrated I2C interface allows customization of charging parameters, and the device's Qi compliance ensures compatibility with a wide range of smartphones. The 48-VQFN package saves board space, and the -40°C to 85°C operating range suits both consumer and commercial installations, although automotive-grade qualifies it for harsher environments.
Recommended
Industrial Wireless Power Receiver Module
The BQ500414Q can be used in industrial wireless power transmitter stations that charge sensors or tools. Its WPC v1.1 compliance ensures interoperability with receivers from various vendors, and the A6 transmitter type provides efficient power transfer. The device's I2C port enables remote monitoring of faults and charging status, while the three LED outputs can indicate operational modes. The wide temperature range supports factory environments without additional cooling.
Recommended
Smart Home Charging Station
In smart home charging pads, the BQ500414Q offers a balance of simplicity and performance. The free-positioning design allows multiple devices to be charged, and the LED outputs provide intuitive status indication. The I2C interface enables integration with smart home hubs, allowing remote control and validation of charging sessions. The small VQFN package allows for a sleek, low-profile pad design, and the device's low operating temperature range covers typical indoor environments.
Recommended
Medical Device Wireless Power Transmitter
For medical devices requiring wireless power, the BQ500414Q provides a robust and safe solution. Its Qi compliance ensures interop with receiver modules used in patient monitors or wearable sensors. The automotive-grade reliability and wide temperature range contribute to long service life, while the I2C interface allows system-level diagnostics. The three LED outputs can communicate charging status to caregivers, and the device's compact package helps in miniaturized medical equipment.
Recommended
Portable Wireless Charging Accessory
The BQ500414Q enables portable charging accessories, such as battery-powered charging pillows or travel pads. The device's low quiescent current and efficient operation help extend battery life, while the free-positioning feature allows flexible device placement. The LED outputs provide charge indication for users. Although the controller is designed for 12V, it can operate from lower supply voltages with adjusted settings, making it suitable for USB-powered designs.
Recommended
Recommended Products Summary
Engineering reference data for BQ500414Q — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | BQ500414QRGZTQ1 | BQ500414QRGZRQ1 |
|---|---|---|---|
| Package | 48-VQFN (7x7) | 48-VQFN (7x7) - same | 48-VQFN (7x7) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| AEC-Q100 Qualified | Yes | Yes | Yes |
| Operating Temperature | -40°C to 85°C | -40°C to 85°C | -40°C to 85°C |
| LED Outputs | 3 | 3 | 3 |
| I2C Interface | Yes | Yes | Yes |
| Supply Voltage | 12 V (typical) | 12 V (typical) | 12 V (typical) |
| Pin Count | 48 | 48 | 48 |
Key Differentiators
- Automotive grade AEC-Q100 qualification (vs Non-automotive wireless controllers)
- Free-positioning capability (vs Fixed-position controllers)
- Integrated I2C and LED drivers (vs Controllers requiring external communication ICs)
Design Notes
The BQ500414Q is optimized for 12-V supply systems. Ensure the input voltage remains within the recommended operating range to prevent malfunction. Use a robust power supply with adequate current capability for the transmitter coil driver. Consider adding a TVS diode on the supply line to protect against automotive load dumps and transients.
Even though the controller itself consumes low power, the power stage driving the coil can dissipate significant heat. Design the PCB with adequate copper pour and thermal vias under the power components. Ensure the VQFN-48 package's exposed pad is soldered to a large ground plane for effective heat spreading, especially in high-ambient automotive environments.
For EMI compliance, keep the coil driver traces short and route them with a ground plane underneath. Place decoupling capacitors close to the controller's power pins. The LED outputs on pins 7, 8, 9 can be driven with a 470-ohm series resistor; route these traces away from analog sensing areas to avoid noise coupling.
Compliance Information
AEC-Q100 qualification is confirmed from TI product page. RoHS/REACH status not available in the provided data.
