LP87524-Q1 - 10A Quad-Output Automotive Buck | TI
MPN: LP87524-Q1 β Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $7.7 | $7.70 |
| 10 | $7.3 | $73.00 |
| 100 | $6.9 | $690.00 |
| 500 | $6.5 | $3,250.00 |
| 1,000 | $6.2 | $6,200.00 |
Drop-in alternatives for LP87524-Q1 β same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool β Select alternative parts for side-by-side comparison:
LP87523-Q1
β‘ Same Packageπ Reference alternative (not in catalog)
LP87564-Q1
β‘ Same Packageπ Reference alternative (not in catalog)
LP87522-Q1
β‘ Same Packageπ Reference alternative (not in catalog)
LP87521-Q1
β‘ Same Packageπ Reference alternative (not in catalog)
LP87525-Q1
β‘ Same Packageπ Reference alternative (not in catalog)
LP87524-Q1 Maximum Ratings & Electrical Characteristics
| Output Type | Quad-output buck converter |
| Total Output Current | 10 A |
| Number of Outputs | 4 |
| Phase | 1 |
| Switching Frequency | 2 MHz |
| Integrated Switches | Yes |
| Load Current Measurement | Supported without external sense resistor |
| Programmable Startup/Shutdown | Supported |
| Package | VQFN-26-HR-EP (4x4.5) |
| Mounting Type | Surface Mount |
| Operating Temperature Range | -40Β°C to +125Β°C (TA) |
| Automotive Grade | AEC-Q100 qualified |
| Input Voltage Range | [DATA_NEEDED] |
| Output Voltage Range | [DATA_NEEDED] |
| Quiescent Current | [DATA_NEEDED] |
LP87524-Q1 vqfn-26-hr-ep (4x4.5) Pin Configuration Guide
Complete pinout information for LP87524-Q1 (vqfn-26-hr-ep (4x4.5) package). This power device features gate, drain, and source terminals. For non-polarized packages, refer to the manufacturer datasheet for exact pin 1 orientation and footprint details. Common applications include power supply design, motor driving, and load switching.
No detailed pinout data available for LP87524-Q1.
Refer to the datasheet for full pin configuration.
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this component. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
LP87524-Q1 is suitable for 6 applications: Automotive ADAS Processor Power, Automotive Infotainment System, Automotive Instrument Cluster, Automotive Telematics/Gateway, Automotive Camera Sensor Power, Industrial Robotics (Automotive-Grade).
Automotive ADAS Processor Power
The LP87524-Q1 delivers 10A across 4 rails to power ADAS SoCs like TDA4VL21HGAALZRQ1. Its 2MHz switching and integrated switches minimize solution size, while programmable start-up sequences ensure safe power sequencing for the processor. The load-current measurement feature allows monitoring without external sense resistors. This makes it ideal for camera processing and object recognition systems in vehicles.
Recommended
Automotive Infotainment System
The LP87524-Q1 provides multiple stable rails for infotainment SoCs like AM62A1-Q1. With 4 outputs and 10A total, it can supply core, memory, and I/O voltages. The 2MHz switching frequency reduces inductor size, enabling compact PCB layout. Programmable delays allow coordinated power-up of display and audio subsystems, preventing pop noise and startup glitches.
Recommended
Automotive Instrument Cluster
For instrument clusters, the LP87524-Q1 offers four regulated outputs to power the cluster controller, display driver, and sensors. Its 10A capability ensures stable operation under dynamic loads. The AEC-Q100 qualification and wide temperature range enable reliable operation in harsh vehicle environments, while the integrated load-current measurement assists in diagnostics without extra components.
Recommended
Automotive Telematics/Gateway
The LP87524-Q1 is suitable for telematics control units and gateways, providing separate rails for the application processor, modem, and CAN transceivers. The 2MHz switching frequency allows small filter inductors, and programmable start-up sequences handle the modem's power ramp requirements. With integrated switches, it replaces multiple single-output regulators, simplifying the BOM.
Recommended
Automotive Camera Sensor Power
LP87524-Q1 can power multiple camera sensors and their processing chips. Its four outputs provide separate bias rails (e.g., 3.3V, 1.8V, 1.2V) with 10A total, enough for sensor arrays. The low noise and high PSRR at 2MHz help maintain image quality. Programmable sequencing ensures sensors power up before the image processor, avoiding initialization errors.
Recommended
Industrial Robotics (Automotive-Grade)
The LP87524-Q1's automotive qualification also suits industrial robotics in demanding environments. It provides 10A across four outputs for motor control MCUs, sensors, and communication interfaces. The 2MHz switching reduces EMI and allows compact power stages. The integrated load-current measurement helps monitor subsystem health, and programmable sequences enable controlled shutdown during fault conditions.
Recommended
Recommended Products Summary
Engineering reference data for LP87524-Q1 β comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | LP87523-Q1 | LP87564-Q1 | LP87522-Q1 |
|---|---|---|---|---|
| Package | VQFN-26-HR-EP (4x4.5) | VQFN-26-HR-EP (4x4.5) | VQFN-26-HR-EP (4x4.5) | VQFN-26-HR-EP (4x4.5) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Total Output Current | 10 A | 5 A | 20 A | [DATA_NEEDED] |
| Number of Outputs | 4 | 3 | 4 | [DATA_NEEDED] |
| Phase | 1 | 2 | 2 | [DATA_NEEDED] |
| Switching Frequency | 2 MHz | [DATA_NEEDED] | [DATA_NEEDED] | [DATA_NEEDED] |
| Automotive Grade | AEC-Q100 | AEC-Q100 | AEC-Q100 | AEC-Q100 |
| Load Current Measurement | Supported | [DATA_NEEDED] | [DATA_NEEDED] | [DATA_NEEDED] |
Key Differentiators
- Higher integration with 10A across four outputs (vs LP87523-Q1)
- Integrated load-current measurement (vs Discrete regulator solutions)
- Automotive AEC-Q100 qualification (vs Consumer PMICs)
Design Notes
The LP87524-Q1 integrates four buck converters with a 2MHz switching frequency. Use 10uF input capacitors close to each VIN pin and 22uF output capacitors for each rail. Ensure low ESR capacitors are selected to minimize ripple and voltage transients.
The VQFN-26-HR-EP package has an exposed pad that must be soldered to a large copper pour. With 10A total output, power dissipation can reach 2-3W. Use thermal vias under the pad and connect to a ground plane to maintain junction temperature below 125Β°C.
Do not omit the programmable start-up delays; incorrect sequencing may cause processor latch-up. The load-current measurement function requires no external sense resistor, but the I2C registers must be configured correctly. Refer to the TI application note for recommended register settings.
Compliance Information
AEC-Q100 qualified per TI product page. RoHS and REACH compliant.
